Feb. 14, 2002

                                List of cuts N5.

----------------------------------------------------------------------------
Cut N   Low limit       Parameter           High limit  Comment
          ns                                    ns
----------------------------------------------------------------------------
1         0.0 < Max (Max-Min) Delay            < 3.0    Fig.1, Page 1, Top
2         0.0 < Max Abs(interp-data) Delay     < 2.0    Fig.1, Page 1, Bottom
3         0.0 < Max Abs(Max,Min - Aver) Offset < 1.0    Fig.1, Page 2, Bottom
4         0.0 < Max Abs(Max,Min - Aver) Slope  < 0.15   Fig.1, Page 3, Bottom
5         1.5 < Max Diff. Slope                < 3.5    Fig.1, Page 4, Top
6        -1.0 < Min Diff. Slope                < 2.5    Fig.1, Page 4, Bottom
7         0.0 < Max Abs(Min,Max-Aver Delay(15))< 1.5    Fig.1, Page 5, Bottom
8        19.5 < Average Offset                 < 24.0   Fig.1, Page 2, Top
9         1.0 < Average Slope                  < 3.0    Fig.1, Page 3, Top
10       35.0 < Average Delay (code=15)        < 65.0   Fig.1, Page 5, Top
----------------------------------------------------------------------------